TukanCAD.com

Knowledge base

TukanCAD manuals

Learn the basics of TukanCAD with a series of short examples.

Profile and square tube joints

Right-angle joint with an internal bracket

Use the upright to check where the end face meets the beam, how both bracket arms sit and where the screws go.

Fix an incompatible square tube

Change the cross-section of the inserted square tube directly in the joint preview

Extension of profile with a joining panel

A straight joining plate bridges the joint on one face of two profiles aligned end to end.

End bolt and key access

The cut shows the thread of the connected part, the plate in the groove and the path of the key through the beam.

Angle bracket and end joint in one assembly

One beam can carry a crossmember on an angle bracket and another on a end bolt.

Fit a diagonal brace with a 45° cut

Mitered kit places a slanted support on the surface of the beam.

Straight push-in connector for square tubes

Both ends will slide onto the opposite arms until they meet.

Join two square tubes at a corner

Orange push-in connector shows the corner center and two perpendicular push-in arms.

Create a T-junction in square tubing

Three tube ends meet at one connector. The horizontal run consists of two pieces.

Spatial corner with three square tubes

The three perpendicular directions form the corner of the spatial frame.

Cross and multi-armed joint

On a flat cross, you will check how to count the arms when choosing the connector.

Fixed corner of square tubes under 135°

A fixed joint determines the direction of both arms.

Hidden corner of square tubes with miter

Two end faces cut below 45° will form a corner with the connector inside.

Use an adjustable hinge connector

For a hinge joint, it defines the position of the end cap and the set internal angle.

Cover open end of square tube

End plug or insert belongs to one free end face.

Engaging an open profile cover

The blind end fits onto the free end face of the profile and closes its cross-section.

Add the third square tube to corner L

The next direction will turn the two-arm corner into a three-arm spatial joint.

Move the angle bracket to the other side

In the case of uprights on the continuous beam there may be more space for mounting angle bracket.

Working with templates

Change a template dimension

X, Y, and Z dimensions in the rotated view can be edited directly.

Change template dimensions in three axes

Follow the width of X, depth Y and height Z on one work desk gradually. The numbers under the model correspond to the picture shown.

Wider table with the same depth

For a longer work surface, you can adjust only one dimension.

Deeper locker to the alcove

The external depth of the cabinet and the internal space within the frame have different dimensions.

Higher shelves with equal number of shelves

The change in height extends uprights and shifts the middle level.

Symmetrically extend two shelf fields

Total width includes both fields and the cross-section of the central upright.

Change flat frame format

In the flat template, you define width and height. Depth derives from cross-section.

Add shelves within the existing rack

Change the number of horizontal frames while maintaining height and ground plan.

Change the number of rows of crates

On one stand the position of the pads and the height of the individual rows shall be calculated simultaneously.

Adjust the side arm of the table to L

When changing the layout of the corner table, follow the inner corner and the link between the boards.

Change the floor plan of the mobile chassis

Width and depth determine the frame perimeter and the placement of crossmembers.

Dimensions of bench from square tubes

The same dimensional fields work even when templates are switched to hollow square tubes.

Dimensions Camper module in centimeters

You enter numbers in centimeters on the shelf above the underrun. The assembly uses millimeters.

Modify the window screen frame

The size of the hole is entered in two axes. The depth of the frame corresponds to the cross-section.

Set the window box opening

Depth determines how far the end wall and floor extend beyond the mounting frame.

Spit out the camper bench seat

In the hinged option, the rear edge of the seat stays on the pivot axis.

Remove the seat without a hinge

The removable seat raises parallel to the upper frame.

Swing out the work surface support

For a removable kitchen cabinet, the side support rotates around the vertical axis.

Open Front Hinge of Box

The end cap swings around the lower edge. The side working flap has its own movement.

Raise one end of the bed

For a split bed, the left and right sides can be positioned separately.

Add a growing level with lighting

The number of growing floors will affect the position of the van and light rails.

From gallery to first model

Walk the way from selecting the system to insert the finished structure.

Find the template based on location and movement

Filters help select, for example, a movable structure that fits into a designated space.

Adjust rack dimensions

The rack shows the difference between changing the outer envelope and adding another shelf.

Camper with and without panels

On the frame above the header, compare the load-bearing structure with added infill panels.

Check how the cage door opens

Both pictures of the moving card show the same set in two positions.

Operate the folding bed and its adjustable end sections

At the GF bed, the sequence of movements affects which part you can open.

Custom template for repeated construction

For example, save a finished working table body and then insert a copy of it.

Submit template with dimensions

You can share the saved template reference before inserting it into the project.

Building and editing

First profile from point to precise length

The location, orientation and cut length can be determined gradually directly in the scene.

Insert a crossmember between two beams

Two beams define the direction, cut length, and joint at each end.

Insert the same type with a new length

Take exact cross-section from upright and create a crossmember of any length

What exactly does the Back button do?

Before returning an edit, read its impact.

Distinguish parts by color

Color resolution will help to recognize adjacent profiles when editing.

Open editor on phone

The phone displays recommendations for comfortable modeling on a larger screen.

Move a branch to a precise position

Crossmember, which rests on the beam, can change the seating position along its axis.

Change part or dimension of the entire assembly

Before adjusting, decide which edge or end should remain in place.

Even crossmembers in the frame

Connect the frame drawing to repeat insertion and comparison of crossmembers.

Selection, copy, and groups

Group related components and safely create a new assembly part.

Find and fix the joint issue

Inspect before sending dimensions to production.

Extension with a fixed end

The fixed end determines which side the length extends to.

Insert a row of identical crossmembers

Repeated insertion takes the profile and the last length.

Set pitch according to crossmembers axis

The numerical spacing determines the distance between the axes of adjacent parts.

Compare the upper edges by shifting

You can align the top edges of two parts even when their lengths differ.

Move copy by exact distance

Copy with preview allows keeping the original in place.

Turn the piece around the selected axis

On the free profile, you will see the difference between shift and turn.

Inspect the selected part without surroundings

Insulation temporarily hides the surrounding parts and facilitates control inside the frame.

Measure the clear opening

The distance between the inner surfaces is less than the outer width of the frame.

Manufacturing and saving

Illustrated guides

Change units without changing the design

Select Units in the workspace toolbar below the top menu. Millimeters are the default. You can switch to centimeters, inches, or feet; your manual choice is remembered. Displayed dimensions, length fields, dimension annotations, and manufacturing documents are converted. The shape, joints, and physical size of designs and templates stay the same. A number without a unit uses the selected unit; you can also enter 25.4 mm or 1 in. Geometric CAD exports use mm as stated in their descriptions.

Select part or whole set

Click to select one piece. It shows the length and in the bottom bar of the action. Ctrl or Shift click to add another part. Select Next → Select the whole body for the entire connected assembly.

Draw the frame from the outline

Open Draw frame, select Rectangle or Line and set the plane. Enter the dimension or mark two points in the preview. Check the selected cross-section and size type before inserting.

Assembly dimension, hole and cut length

The body dimensions modify the external width, depth, and height of the selected assembly. Measure a free opening between inner edges. Adjust individual profile cut length in the Cut List. You can enter cm or expressions such as (1200−40)/2.

Align or distribute more parts

Select at least two elements and open Align / Distribute. Choose edge, center, equal height, equal free gaps, or numerical spacing along axes. Check the preview and confirm Use.

Insert the same profile repeatedly

Select part and click below on Same Type and Length. The green preview takes over the cross-section and length. With the Repeat toggle in Lite or Continue with Same Profile, you can immediately place additional parts after confirmation. Esc ends the placement.

Measure the distance in the scene

Turn on the rule and click on two points in the model. Read the resulting distance at the link. In Lite mode you will also find the rule box in the View menu.

Lock the length, position or tie the dimensions

For the marked part, open its properties. Locking the length protects cut length, anchoring the position prevents moving. To bind the dimensions of the assembly determines whether the dimension change is reflected in the downstream parts.

Front threaded joint and machining

Select Front screw connections with machining in the Profile Connection. The option applies to new connections; existing can be converted by button or changed individually in detail. Angle brackets and machined connections can be combined. Use I-Type 5, 6 or 8 compatible catalog profiles for machining. Show the screws reveals the connection. Profile machining will offer preview, PDF with views of A–D and CSV with the same parts positions. Create a new plan after moving the connection. Square tubess don't work.

Placement and removal of cups

In Advanced mode, switch panel Add element to aluminum profiles and select Envelopes to all open ends. Click on a specific cover to open a detail where you can edit or delete it.

Add a brace at 45°

Right-click on the supporting profile and open Advanced: Miter at 45°. Set the beam surface, direction, distance from start, and length along the axis. The dialog verifies fit and compatibility with the I-Type 8 series.

Show or remove panels and infills

Turn panels and infills on or off, or remove an individual panel from the design.

Open a lid or unfold a template

Preview the movement of doors, lids and folding parts, then return them to their starting position before resizing the frame.

Expand the fast selection of profiles and square tubes

Open Profiles, Square Tubes, or Add Another when selecting cross-section. In the catalog, search by dimension, name, or manufacturer code. Check the appropriate item and add it to your default list.

Save your own template

In My templates, enter a name and save the entire project or the selected body. Select Insert copy to add the template to the current project. Select Back up to download a portable TUKAN project file.

Organize the construction into groups

Select the parts and create a group from the selection in the Tree of Design. You can name, select, hide or lock the group. Groups serve for organization and do not mechanically connect parts themselves.

Control the dimension named by parameter

In Advanced Tools → Parameters, set a value, for example width = 800. Select the body, choose its axis, and enter the width expression. Before continuing work, verify the resulting dimensions.

Find Penetrations and Problems in Connections

Open Construction Control. Select Show or Show in 3D and view the parts concerned. In Advanced Tools, there is also the Compilability to control the direct access of the tool.

Save the project and restore the backup

For further modifications, select Save Project → Project TUKAN (.cad-al.json). Open the file through Load Project. Click on the project name to open Projects and backup. After login in My workshop you will find your own constructions, their copies, shared links, demand and restoration of the previous stored state. Changes are automatically stored in your account. Local shared links work on this computer when the CAD is running.

Prepare cutting plan

Open Production and Cutting Plan. Enter purchase bar length, saw kerf, and end alignment. Check for errors, piece layout, and waste. The plan can be saved as PDF or CSV.

Start custom cuts

Open Purchase and Cuts or Purchase Lengths and Custom Cuts in the production cut list. Enter cross-section, available lengths, and number of pieces. Mark used cuts after plan review.

Select the appropriate output format

Open Drawings / CAD to export dimensioned views as PDF or HTML. Use DXF for supported panel parts. Use STEP to transfer simplified geometry and .cad-al.json to continue editing in TukanCAD.

Browse the set by piece

Open the assembly walkthrough and review the sequence, including any subassemblies you need to build first. Confirm, then select Next part. At each step, check the highlighted part and the required fasteners.

Insert the first profile

Select the 20×20 T-slot profile and click Insert profile. Move the green preview onto the work surface. Click to set the start point and drag to set the length. Click again or press Enter to place the profile.

Attach a second profile

With snapping on, move the green preview onto the side face of the first profile. It snaps perpendicular to the face. Click, drag to the required length and confirm. If Angle brackets is selected and the joint is compatible, a bracket is added.

Change the part length

Click the part and enter its new length beside it, for example 300 mm. The orange preview shows which connected parts will move. A marker identifies the fixed point and an arrow marks the moving end. In the anchor and connections settings, choose the start, center or end. Press Enter to apply or Esc to cancel. In Advanced mode you can also drag the end arrow to preview a change.

Finish the frame

Attach a second crossmember of the same length near the opposite end of the beam. Place the last profile between the free ends. Use the clear opening between the crossmembers to enter its length.

Check the parts list

Below the model you can see each part and its cut length. Select Show cut list for the summary. Open Manufacturing and cutting plan for workshop documents.

Navigate the 3D view

Right-drag to orbit. Scroll to zoom, or hold the middle mouse button and drag to pan. The circle beside the axes restores the isometric view. Press F to fit the selection or the whole model.

Move along the beam

Select the perpendicular branch. Drag it or its bracket along the beam. The black marker shows where the joint meets the edge. You can also type the dimension. Other connections may limit travel.

Move, copy, and rotate in scene

Click a part to open the bottom toolbar. For Move or Copy, drag a colored arrow or choose a direction and enter a distance. For Rotate, drag the arc, use ±90° or type an angle. Enter applies, Esc cancels and Ctrl+Z undoes the last completed change. Open More for details or deletion.

Angle brackets and couplings for square tubes

With Angle brackets selected, a compatible right-angle profile joint is fitted with a bracket. For square tubes of matching cross-section and wall thickness, an orange connector is added when one fits the joint geometry. Click it to inspect the connection.

Start from a template

Open Templates, select a frame, set its dimensions and insert it. Use Show boards and infill panels to change the gallery previews. You can edit the inserted frame and save it as your own project.

More useful guides

Orientation in work plane

Basic and Advanced have the same top bar with pictograms. Lite's got a quick bar. Pictograms at the Profile Direction show three insertion axes. In all modes you will find the selected part in the bottom bar.

Assembly and part dimensions

Body dimensions change the assembly. External dimensions, free opening, and cut length are different values. For part length, you can enter mm, cm, or an expression, such as (1200−40)/2.

Machining, struts and infill panels

For profiles, you can select end fasteners that require machining. Select Show screws for joint details. Profile machining provides a dimensioned drawing and a CSV file. To add a compatible diagonal brace, right-click and select the advanced 45° brace option. Click a panel or an end cap to edit or delete it.

Catalogs

Profiles and square tubes in the top bar open catalogs. Adding more expands the quick selection.

Saving and Export

For later modifications save the project TUKAN (.cad-al.json). STEP, STL and OBJ transfer geometry to other programs. PDF contains views, DXF contours supported boards.

Construction check

Check shows detected issues with dimensions, overlaps, and joints. Clicking Show highlights the affected area.

Troubleshooting

The profile will not stick

Check if your snapping is on. Drive to a specific surface or end of the beam. If the preview is red, read the reason directly at the preview.

Connection element did not appear

Check down and set up the Profile Connection. Angle bracket requires compatible groove and space on both surfaces. For square tubes check the cross-section, wall thickness and connection availability for the given joint.

I changed the length and moved other parts

Return the change using Ctrl+Z. In the view, unpack the Fixed Point and Link and check the orange marked parts. End connections can follow moving ends even when changing the length of a single part.

I can't change the length or position

If a part is locked, open its locks in the Additional menu. Check Lock Length and Fix Position. When moving an offset, also verify any other joints holding it.

Preview reports overlay of parts

Use Show Overlap. The view will focus on the selected area. Adjust the direction, distance, or length and recheck the preview. Esc cancels the current edit.

The model disappeared from sight

Press F without selection or use Show All. Restore the default isometric view with the wheel on the axes.

The model remains partially hidden

Select Show All / End Isolation. Displaying all adjusts the view; hidden elements are revealed individually.

The cutting plan part does not fit on the pole

Check the length of the shopping pole, saw kerf and alignment of ends. Select a longer bar available or modify the design.

When changing the assembly, bolts or drilling operations are missing

Check the connection detail set and profile compatibility. Profile machining writes operations for valid joints requiring machining.

Unable to adjust spread movable assembly

In Hinges and lids, return the mechanism to the initial working position described in the dialog, then try the change again.

STEP export cannot be opened as a TUKAN project

Load project expects file .cad-al.json. If you don't have it, look at Project and Backup.

Keyboard shortcuts

Ctrl+C / Ctrl+V

Copy of selected profiles next to the original construction, preserving connections within the selection.

Ctrl+D

Copies of the connected body with preview and input shift.

Alt · Press and Release

When inserting, turn the cross-section by 90°. For selection, the connected body rotates around the longitudinal axis of the selected profile.

Alt+X / Alt+Y / Alt+Z

Turns the body 90 degrees around the world axis. Shift's turning direction.

R

Opens the rotation with axis and angle selection.

X / Y / Z

When inserting, they choose the longitudinal axis. Shift will choose the opposite direction if the landing allows.

Tab / N

When inserting, the alignment / point snapping switches.

Enter / Esc

Confirms / cancels the elaborate insertion or modification.

Delete

Delete selection. For connections, a range of removal options will be offered.

Ctrl+Z / Ctrl+Y

Back / again. Ctrl+Shift+Z also works again.

Ctrl+A

He picks out all the profiles.

Ctrl+S / Ctrl+O

Offers save or export / opens a TUKAN project.

F

Focus the selection or display the entire model.

F1

Opens the clue.

Questions about the step-by-step guides

Why does the original square tube have two pieces after adding a bend?

The push-in T has three arms. Each requires a free end face. Therefore, in the cut list you will find two new beam cuts and a separate offset

Read the guide →
How do I add a threaded joint while preserving already installed angle brackets?

Switch the connection method and select Only new connections. To change one additional location, open the detail of a specific joint.

Read the guide →
Why are two equally long profiles located on different production positions?

Position also determines the placement of holes, threads, and cuts. Open the document preview and compare the operation tables for both positions.

Read the guide →
Why can't the right half of the bed be flipped?

Check the angle of both positioning faces. Return them to the bed plane and then fold the frame.

Read the guide →
Why doesn't the template appear after entering dimensions?

Searching compares base dimensions with a maximum in centimeters. Release dimension constraints, filter movement, and favorite items. Also check the structural system.

Read the guide →
How do I pass on the manual adjustments to the embedded template?

Save the whole modified project as .cad-al.json. Link Share template passes the layout settings in the gallery.

Read the guide →