Profile and square tube jointsEnd bolt and key accessThe cut shows the thread of the connected part, the plate in the groove and the path of the key through the beam.▷ Play animationChoose a compatible pairUse verified same I-Type series 5, 6 or 8. Select Front screw joints with machining and insert the end face into the axis of the open groove.Find the boltSelect Show bolts and open the joint. Transparent profiles reveal the bolt in the offset end face and the connecting plate in the beamCheck accessThe key enters from the opposite side of the beam. Check the access hole in the beam and thread in the connected part separately in Profile Machining.