TukanCAD.com
Sim racing and cockpits · Template #200

Arrange seating, controls and display in a helicopter simulator.

Start with your seated working position. Then arrange the centre stick, left control and front display portal around it.

Go to the steps ↓

The CAD editor and templates are free to use.

Helicopter simulator
An original CAD preview of the matching template. Both positions are shown for a moving design.
#200Template
90 × 170 × 130 cmStarting design
Your dimensionsFit the design to your space.
01

What to measure before designing

Measure between finished surfaces and allow for your actual equipment. Note the openings and passages through which the assembly must fit.

01

Measure your seat and the space needed in front of its cushion.

02

Compare the control dimensions and their complete movement ranges.

03

Measure the display, mounting arrangement and intended viewing distance.

A common planning mistake

Castors and mounting surfaces are separate accessories. The design footprint alone does not establish the stability of a fully equipped assembly.

02

Starting template dimensions

90 × 170 × 130 cm

These are the initial design values in the order of its dimension fields, not automatically its usable internal space. Check each axis meaning in the template labels.

03

From measurements to your own design

  1. Open the matching template.Inspect its details, starting dimensions and supported material options. Choose the option you intend to use.
  2. Adjust dimensions to your measurements.Use the dimension fields or dimension labels in the template details. Follow the field names and include a unit such as cm. Compare the entered values with the updated preview.
  3. Insert the design and inspect it from every side.Switch panels and infills on and off to inspect the frame itself. For a moving design, check its individual positions. Follow the editor instructions before another dimension change.
  4. Save your own assembly.After checking dimensions, save the project. Prepare the parts list and drawings from the adjusted assembly, not from the original example.

CAD operation guides →

04

What to check in the completed design

  • Check that moving controls do not hit the seat or frame.
  • Check access to both the left mount and centre control.
  • Compare the outer footprint with the intended operating and storage spaces.

This guide helps plan the dimensional layout. Actual materials, hardware, attachments and load capacity depend on the finished construction; the preview alone does not establish them.

Your next step

Fit the design to your space.

Open the starting template and enter values from your own measurements. The link keeps the standard starting construction.

Open the template in CAD ↗View template details →

Related practical guides

All practical guides →