TukanCAD.com
Sim racing and cockpits · Template #199

Plan side-control reach in a combined flight and racing cockpit.

Switching simulators requires several working positions. Arrange the wheel, centre control and both side arms around the actual seat.

Go to the steps ↓

The CAD editor and templates are free to use.

Combined aircraft and racing cockpit
An original CAD preview of the matching template. Both positions are shown for a moving design.
#199Template
110 × 165 × 82 cmStarting design
Your dimensionsFit the design to your space.
01

What to measure before designing

Measure between finished surfaces and allow for your actual equipment. Note the openings and passages through which the assembly must fit.

01

Measure the seat and basic body position relative to the pedals.

02

Measure both side control assemblies, including their mounts and connectors.

03

Compare the complete cockpit width with clearance for rotating the arms.

A common planning mistake

Illustrated controls do not define the dimensions of your devices. Compare every mounting point and arm path with the actual equipment.

02

Starting template dimensions

110 × 165 × 82 cm

These are the initial design values in the order of its dimension fields, not automatically its usable internal space. Check each axis meaning in the template labels.

03

From measurements to your own design

  1. Open the matching template.Inspect its details, starting dimensions and supported material options. Choose the option you intend to use.
  2. Adjust dimensions to your measurements.Use the dimension fields or dimension labels in the template details. Follow the field names and include a unit such as cm. Compare the entered values with the updated preview.
  3. Insert the design and inspect it from every side.Switch panels and infills on and off to inspect the frame itself. For a moving design, check its individual positions. Follow the editor instructions before another dimension change.
  4. Save your own assembly.After checking dimensions, save the project. Prepare the parts list and drawings from the adjusted assembly, not from the original example.

CAD operation guides →

04

What to check in the completed design

  • Check access around the centre mount when entering the cockpit.
  • Inspect the side-arm end positions and pedal tilt.
  • Compare control reach in the flight and racing configurations.

This guide helps plan the dimensional layout. Actual materials, hardware, attachments and load capacity depend on the finished construction; the preview alone does not establish them.

Your next step

Fit the design to your space.

Open the starting template and enter values from your own measurements. The link keeps the standard starting construction.

Open the template in CAD ↗View template details →

Related practical guides

All practical guides →