TukanCAD.com
Sim racing and cockpits · Template #28

Start a racing cockpit with the seat, wheel and pedals.

Base the frame dimensions on your own equipment and seated reach. The starting assembly helps arrange the individual mounting areas.

Go to the steps ↓

The CAD editor and templates are free to use.

Race simulator cockpit
An original CAD preview of the matching template. Both positions are shown for a moving design.
#28Template
65 × 145 × 70 cmStarting design
Your dimensionsFit the design to your space.
01

What to measure before designing

Measure between finished surfaces and allow for your actual equipment. Note the openings and passages through which the assembly must fit.

01

Measure the actual seat, its mounting points and any seat slides.

02

Measure the wheel mount, its position in front of your body and legroom beneath it.

03

Compare the pedal unit with your reach and intended foot position.

A common planning mistake

The seat and wheel in the preview are illustrations, not supplied components. Adjust mounting patterns to your actual equipment.

02

Starting template dimensions

65 × 145 × 70 cm

These are the initial design values in the order of its dimension fields, not automatically its usable internal space. Check each axis meaning in the template labels.

03

From measurements to your own design

  1. Open the matching template.Inspect its details, starting dimensions and supported material options. Choose the option you intend to use.
  2. Adjust dimensions to your measurements.Use the dimension fields or dimension labels in the template details. Follow the field names and include a unit such as cm. Compare the entered values with the updated preview.
  3. Insert the design and inspect it from every side.Switch panels and infills on and off to inspect the frame itself. For a moving design, check its individual positions. Follow the editor instructions before another dimension change.
  4. Save your own assembly.After checking dimensions, save the project. Prepare the parts list and drawings from the adjusted assembly, not from the original example.

CAD operation guides →

04

What to check in the completed design

  • Check entry into and exit from the cockpit.
  • Compare wheel and pedal reach with one specific seat position.
  • Check your equipment mounting patterns and cable space.

This guide helps plan the dimensional layout. Actual materials, hardware, attachments and load capacity depend on the finished construction; the preview alone does not establish them.

Your next step

Fit the design to your space.

Open the starting template and enter values from your own measurements. The link keeps the standard starting construction.

Open the template in CAD ↗View template details →

Related practical guides

All practical guides →