What to measure before designing
Measure between finished surfaces and allow for your actual equipment. Note the openings and passages through which the assembly must fit.
Measure the chair position relative to the pedals and required wheel reach.
Compare the portal height and width with your knees and wheel mount.
Measure the storage space for the folded stand with its controls attached.
An office chair is not included in the inserted frame. The stand preview therefore cannot replace measurements of your own chair.
Starting template dimensions
65 × 130 × 78 cm
These are the initial design values in the order of its dimension fields, not automatically its usable internal space. Check each axis meaning in the template labels.
From measurements to your own design
- Open the matching template.Inspect its details, starting dimensions and supported material options. Choose the option you intend to use.
- Adjust dimensions to your measurements.Use the dimension fields or dimension labels in the template details. Follow the field names and include a unit such as cm. Compare the entered values with the updated preview.
- Insert the design and inspect it from every side.Switch panels and infills on and off to inspect the frame itself. For a moving design, check its individual positions. Follow the editor instructions before another dimension change.
- Save your own assembly.After checking dimensions, save the project. Prepare the parts list and drawings from the adjusted assembly, not from the original example.
What to check in the completed design
- Inspect the pedal frame lifting before the portal folds.
- Check clearance around connectors in the folded position.
- Compare the working footprint with the space around the chair.
This guide helps plan the dimensional layout. Actual materials, hardware, attachments and load capacity depend on the finished construction; the preview alone does not establish them.
Fit the design to your space.
Open the starting template and enter values from your own measurements. The link keeps the standard starting construction.
Open the template in CAD ↗View template details →Related practical guides
- Start a racing cockpit with the seat, wheel and pedals.
- Plan side-control reach in a combined flight and racing cockpit.
- Arrange seating, controls and display in a helicopter simulator.