TukanCAD.com
Retail and material handling · Template #151

Arrange products and staff access around a display counter.

The counter should display products while providing practical access for staff. Base the dimensions on the actual items on display.

Go to the steps ↓

The CAD editor and templates are free to use.

Sales counter with a vitrine and storage base
An original CAD preview of the matching template. Both positions are shown for a moving design.
#151Template
120 × 55 × 100 cmStarting design
Your dimensionsFit the design to your space.
01

What to measure before designing

Measure between finished surfaces and allow for your actual equipment. Note the openings and passages through which the assembly must fit.

01

Measure the width and depth of the largest displayed items.

02

Compare display-level heights with product visibility and staff reach.

03

Measure the aisle behind the counter and the customer space in front.

A common planning mistake

The outer cabinet dimensions are not the usable shelf dimensions. Allow for the frame and panels when planning product placement.

02

Starting template dimensions

120 × 55 × 100 cm

These are the initial design values in the order of its dimension fields, not automatically its usable internal space. Check each axis meaning in the template labels.

03

From measurements to your own design

  1. Open the matching template.Inspect its details, starting dimensions and supported material options. Choose the option you intend to use.
  2. Adjust dimensions to your measurements.Use the dimension fields or dimension labels in the template details. Follow the field names and include a unit such as cm. Compare the entered values with the updated preview.
  3. Insert the design and inspect it from every side.Switch panels and infills on and off to inspect the frame itself. For a moving design, check its individual positions. Follow the editor instructions before another dimension change.
  4. Save your own assembly.After checking dimensions, save the project. Prepare the parts list and drawings from the adjusted assembly, not from the original example.

CAD operation guides →

04

What to check in the completed design

  • Check access through the rear sliding doors.
  • Compare the internal plinth space with the equipment to be stored.
  • Inspect how the cabinet is divided into two display levels.

This guide helps plan the dimensional layout. Actual materials, hardware, attachments and load capacity depend on the finished construction; the preview alone does not establish them.

Your next step

Fit the design to your space.

Open the starting template and enter values from your own measurements. The link keeps the standard starting construction.

Open the template in CAD ↗View template details →

Related practical guides

All practical guides →