TukanCAD.com
Retail and material handling · Template #456

Compare the load and fork pockets of a four-way pallet.

The low frame leaves fork access from all four sides. Before changing the footprint, compare the load with the actual handling equipment.

Go to the steps ↓

The CAD editor and templates are free to use.

Four-way pallet from closed square tubes
An original CAD preview of the matching template. Both positions are shown for a moving design.
#456Template
120 × 80 × 16 cmStarting design
Your dimensionsFit the design to your space.
01

What to measure before designing

Measure between finished surfaces and allow for your actual equipment. Note the openings and passages through which the assembly must fit.

01

Measure the load footprint and the areas resting on the crossmembers.

02

Measure the width, thickness and spacing of the forks being used.

03

Compare overall height with the required clear height of the fork pockets.

A common planning mistake

Four-way access in the model does not establish pallet load capacity or compatibility with every truck. Check pocket dimensions against the actual equipment.

02

Starting template dimensions

120 × 80 × 16 cm

These are the initial design values in the order of its dimension fields, not automatically its usable internal space. Check each axis meaning in the template labels.

03

From measurements to your own design

  1. Open the matching template.Inspect its details, starting dimensions and supported material options. Choose the option you intend to use.
  2. Adjust dimensions to your measurements.Use the dimension fields or dimension labels in the template details. Follow the field names and include a unit such as cm. Compare the entered values with the updated preview.
  3. Insert the design and inspect it from every side.Switch panels and infills on and off to inspect the frame itself. For a moving design, check its individual positions. Follow the editor instructions before another dimension change.
  4. Save your own assembly.After checking dimensions, save the project. Prepare the parts list and drawings from the adjusted assembly, not from the original example.

CAD operation guides →

04

What to check in the completed design

  • Inspect access from both sides and both ends.
  • Compare spacer support positions with the fork paths.
  • Check the crossmember arrangement beneath the actual load.

This guide helps plan the dimensional layout. Actual materials, hardware, attachments and load capacity depend on the finished construction; the preview alone does not establish them.

Your next step

Fit the design to your space.

Open the starting template and enter values from your own measurements. The link keeps the standard starting construction.

Open the template in CAD ↗View template details →

Related practical guides

All practical guides →