TukanCAD.com
Camper conversions · Template #271

Plan a portable kitchen with space for both work wings.

The folded box is used for transport, while the unfolded assembly forms a separate workstation. Measure both uses, including the supporting legs.

Go to the steps ↓

The CAD editor and templates are free to use.

Portable kitchen with two side wings and legs
An original CAD preview of the matching template. Both positions are shown for a moving design.
#271Template
140 × 55 × 85 cmStarting design
Your dimensionsFit the design to your space.
01

What to measure before designing

Measure between finished surfaces and allow for your actual equipment. Note the openings and passages through which the assembly must fit.

01

Measure the vehicle storage space and the opening for loading the folded assembly.

02

Outside, mark an area for the box, both wings and the working space around them.

03

Compare the work surface height with your equipment and cooking arrangement.

A common planning mistake

The transport width of the box is not the complete working width. Both side surfaces need space when unfolded.

02

Starting template dimensions

140 × 55 × 85 cm

These are the initial design values in the order of its dimension fields, not automatically its usable internal space. Check each axis meaning in the template labels.

03

From measurements to your own design

  1. Open the matching template.Inspect its details, starting dimensions and supported material options. Choose the option you intend to use.
  2. Adjust dimensions to your measurements.Use the dimension fields or dimension labels in the template details. Follow the field names and include a unit such as cm. Compare the entered values with the updated preview.
  3. Insert the design and inspect it from every side.Switch panels and infills on and off to inspect the frame itself. For a moving design, check its individual positions. Follow the editor instructions before another dimension change.
  4. Save your own assembly.After checking dimensions, save the project. Prepare the parts list and drawings from the adjusted assembly, not from the original example.

CAD operation guides →

04

What to check in the completed design

  • Inspect the positions of all supporting legs.
  • Check that access remains clear beside the unfolded wings.
  • Compare the folded envelope with the space reserved inside the vehicle.

This guide helps plan the dimensional layout. Actual materials, hardware, attachments and load capacity depend on the finished construction; the preview alone does not establish them.

Your next step

Fit the design to your space.

Open the starting template and enter values from your own measurements. The link keeps the standard starting construction.

Open the template in CAD ↗View template details →

Related practical guides

All practical guides →