TukanCAD.com
Camper conversions · Template #237

Plan daytime and sleeping space beneath a ceiling bed.

A lifting bed changes how the same part of the van is used during the day. Compare its sleeping height, ceiling position and the space between them.

Go to the steps ↓

The CAD editor and templates are free to use.

Bed that extends to the ceiling
An original CAD preview of the matching template. Both positions are shown for a moving design.
#237Template
190 × 140 × 190 cmStarting design
Your dimensionsFit the design to your space.
01

What to measure before designing

Measure between finished surfaces and allow for your actual equipment. Note the openings and passages through which the assembly must fit.

01

Measure the required mattress footprint and the space between finished walls.

02

Establish the sleeping height and allow room above the frame for the mattress and bedding.

03

Measure ceiling obstructions, lights and other equipment.

A common planning mistake

A suitable footprint does not determine the required height or the actual load capacity of the suspension and lifting mechanism.

02

Starting template dimensions

190 × 140 × 190 cm

These are the initial design values in the order of its dimension fields, not automatically its usable internal space. Check each axis meaning in the template labels.

03

From measurements to your own design

  1. Open the matching template.Inspect its details, starting dimensions and supported material options. Choose the option you intend to use.
  2. Adjust dimensions to your measurements.Use the dimension fields or dimension labels in the template details. Follow the field names and include a unit such as cm. Compare the entered values with the updated preview.
  3. Insert the design and inspect it from every side.Switch panels and infills on and off to inspect the frame itself. For a moving design, check its individual positions. Follow the editor instructions before another dimension change.
  4. Save your own assembly.After checking dimensions, save the project. Prepare the parts list and drawings from the adjusted assembly, not from the original example.

CAD operation guides →

04

What to check in the completed design

  • Compare both height positions with the rest of the conversion.
  • Check the space beneath the frame when it is stored overhead.
  • Inspect the suspension positions and the space for the lifting arrangement.

This guide helps plan the dimensional layout. Actual materials, hardware, attachments and load capacity depend on the finished construction; the preview alone does not establish them.

Your next step

Fit the design to your space.

Open the starting template and enter values from your own measurements. The link keeps the standard starting construction.

Open the template in CAD ↗View template details →

Related practical guides

All practical guides →