What to measure before designing
Measure between finished surfaces and allow for your actual equipment. Note the openings and passages through which the assembly must fit.
Measure the largest moving envelope of the printer, including cables.
Allow space for the spool and operation if these are to be inside the enclosure.
Measure the enclosure location on the desk and the space for opening its front.
The outer frame dimensions are not its clear internal dimensions. The enclosure design also does not determine the printer operating temperature conditions.
Starting template dimensions
70 × 60 × 75 cm
These are the initial design values in the order of its dimension fields, not automatically its usable internal space. Check each axis meaning in the template labels.
From measurements to your own design
- Open the matching template.Inspect its details, starting dimensions and supported material options. Choose the option you intend to use.
- Adjust dimensions to your measurements.Use the dimension fields or dimension labels in the template details. Follow the field names and include a unit such as cm. Compare the entered values with the updated preview.
- Insert the design and inspect it from every side.Switch panels and infills on and off to inspect the frame itself. For a moving design, check its individual positions. Follow the editor instructions before another dimension change.
- Save your own assembly.After checking dimensions, save the project. Prepare the parts list and drawings from the adjusted assembly, not from the original example.
What to check in the completed design
- Check free movement of the print bed and print head.
- Check access to the controls and removal of the finished print.
- Inspect the panels and bare frame, comparing the actual internal dimensions.
This guide helps plan the dimensional layout. Actual materials, hardware, attachments and load capacity depend on the finished construction; the preview alone does not establish them.
Fit the design to your space.
Open the starting template and enter values from your own measurements. The link keeps the standard starting construction.
Open the template in CAD ↗View template details →Related practical guides
- Plan a workshop station with storage and legroom.
- Arrange parcel flow around an L-shaped packing station.
- Size a workbench around the job, not just the wall.