TukanCAD.com
Workshops and workbenches · Template #14

Size a workbench around the job, not just the wall.

A well-sized bench leaves room for the workpiece, tools and movement around it. Use the starting frame to plan your own workshop.

Go to the steps ↓

The CAD editor and templates are free to use.

Work desk with reinforcement
An original CAD preview of the matching template. Both positions are shown for a moving design.
#14Template
140 × 70 × 90 cmStarting design
Your dimensionsFit the design to your space.
01

What to measure before designing

Measure between finished surfaces and allow for your actual equipment. Note the openings and passages through which the assembly must fit.

01

Measure the workspace and the required passage in front of the bench.

02

Place your largest usual workpiece on a plan of the tabletop.

03

Compare the height with the task and the actual tabletop thickness.

A common planning mistake

A larger footprint does not by itself provide a higher load capacity. Consider bracing, member size and the actual tabletop for your intended use.

02

Starting template dimensions

140 × 70 × 90 cm

These are the initial design values in the order of its dimension fields, not automatically its usable internal space. Check each axis meaning in the template labels.

03

From measurements to your own design

  1. Open the matching template.Inspect its details, starting dimensions and supported material options. Choose the option you intend to use.
  2. Adjust dimensions to your measurements.Use the dimension fields or dimension labels in the template details. Follow the field names and include a unit such as cm. Compare the entered values with the updated preview.
  3. Insert the design and inspect it from every side.Switch panels and infills on and off to inspect the frame itself. For a moving design, check its individual positions. Follow the editor instructions before another dimension change.
  4. Save your own assembly.After checking dimensions, save the project. Prepare the parts list and drawings from the adjusted assembly, not from the original example.

CAD operation guides →

04

What to check in the completed design

  • Inspect the lower perimeter brace and clearance around the legs.
  • Check access to items stored beneath the top.
  • Compare the frame with the intended vice or other equipment.

This guide helps plan the dimensional layout. Actual materials, hardware, attachments and load capacity depend on the finished construction; the preview alone does not establish them.

Your next step

Fit the design to your space.

Open the starting template and enter values from your own measurements. The link keeps the standard starting construction.

Open the template in CAD ↗View template details →

Related practical guides

All practical guides →