TukanCAD.com
Camper conversions · Template #110

Leave dining space around a kitchen with a sliding table.

Extending the compact kitchen creates a dining space. Allow for the frame, the extended tabletop and the person sitting beside it.

Go to the steps ↓

The CAD editor and templates are free to use.

Kitchen with a slide-out dining table
An original CAD preview of the matching template. Both positions are shown for a moving design.
#110Template
100 × 45 × 90 cmStarting design
Your dimensionsFit the design to your space.
01

What to measure before designing

Measure between finished surfaces and allow for your actual equipment. Note the openings and passages through which the assembly must fit.

01

Measure the kitchen run and the available depth between furniture.

02

Allow space to extend the table fully and open its folding section.

03

Compare the tabletop height with the actual seat and required knee space.

A common planning mistake

The kitchen frame footprint does not describe the space needed by the extended dining table and its folding section.

02

Starting template dimensions

100 × 45 × 90 cm

These are the initial design values in the order of its dimension fields, not automatically its usable internal space. Check each axis meaning in the template labels.

03

From measurements to your own design

  1. Open the matching template.Inspect its details, starting dimensions and supported material options. Choose the option you intend to use.
  2. Adjust dimensions to your measurements.Use the dimension fields or dimension labels in the template details. Follow the field names and include a unit such as cm. Compare the entered values with the updated preview.
  3. Insert the design and inspect it from every side.Switch panels and infills on and off to inspect the frame itself. For a moving design, check its individual positions. Follow the editor instructions before another dimension change.
  4. Save your own assembly.After checking dimensions, save the project. Prepare the parts list and drawings from the adjusted assembly, not from the original example.

CAD operation guides →

04

What to check in the completed design

  • Check passage through the interior with the table extended and retracted.
  • Inspect the relationship between slides and mounting plates in the model.
  • Compare the dining surface with your dishes and the number of places needed.

This guide helps plan the dimensional layout. Actual materials, hardware, attachments and load capacity depend on the finished construction; the preview alone does not establish them.

Your next step

Fit the design to your space.

Open the starting template and enter values from your own measurements. The link keeps the standard starting construction.

Open the template in CAD ↗View template details →

Related practical guides

All practical guides →