TukanCAD.com
Workshops and workbenches · Template #98

Allow room for a folding bench and its rotating supports.

For a wall bench, assess both the working position and the folded space. The supports and top move separately and need their own clear paths.

Go to the steps ↓

The CAD editor and templates are free to use.

Working table tilting to the wall
An original CAD preview of the matching template. Both positions are shown for a moving design.
#98Template
150 × 60 × 90 cmStarting design
Your dimensionsFit the design to your space.
01

What to measure before designing

Measure between finished surfaces and allow for your actual equipment. Note the openings and passages through which the assembly must fit.

01

Measure the free wall width and obstructions around the support beam.

02

Choose the required working depth and surface height.

03

Compare the folded top with clearance near the floor and along the wall.

A common planning mistake

The supports fold against the wall before the top. The tabletop thickness alone does not describe the complete folded envelope.

02

Starting template dimensions

150 × 60 × 90 cm

These are the initial design values in the order of its dimension fields, not automatically its usable internal space. Check each axis meaning in the template labels.

03

From measurements to your own design

  1. Open the matching template.Inspect its details, starting dimensions and supported material options. Choose the option you intend to use.
  2. Adjust dimensions to your measurements.Use the dimension fields or dimension labels in the template details. Follow the field names and include a unit such as cm. Compare the entered values with the updated preview.
  3. Insert the design and inspect it from every side.Switch panels and infills on and off to inspect the frame itself. For a moving design, check its individual positions. Follow the editor instructions before another dimension change.
  4. Save your own assembly.After checking dimensions, save the project. Prepare the parts list and drawings from the adjusted assembly, not from the original example.

CAD operation guides →

04

What to check in the completed design

  • First inspect the folding movement of both side supports.
  • Then check the movement of the complete work surface.
  • Check that the required passage remains clear when folded.

This guide helps plan the dimensional layout. Actual materials, hardware, attachments and load capacity depend on the finished construction; the preview alone does not establish them.

Your next step

Fit the design to your space.

Open the starting template and enter values from your own measurements. The link keeps the standard starting construction.

Open the template in CAD ↗View template details →

Related practical guides

All practical guides →