TukanCAD.com
Cages and enclosures · Template #121

Arrange doors, a cat opening and cleaning access in an enclosure.

Plan the space for the animal and for the person entering and cleaning it. Compare the footprint with nearby paths and equipment.

Go to the steps ↓

The CAD editor and templates are free to use.

Cat house with gable roof
An original CAD preview of the matching template. Both positions are shown for a moving design.
#121Template
200 × 100 × 220 cmStarting design
Your dimensionsFit the design to your space.
01

What to measure before designing

Measure between finished surfaces and allow for your actual equipment. Note the openings and passages through which the assembly must fit.

01

Measure the available area and the approach to the main door.

02

Choose the small animal opening position relative to the adjoining space.

03

Compare overall roof height with surrounding obstructions.

A common planning mistake

The frame preview does not determine suitable mesh, gaps or latches for a particular animal. Choose these details for the actual use.

02

Starting template dimensions

200 × 100 × 220 cm

These are the initial design values in the order of its dimension fields, not automatically its usable internal space. Check each axis meaning in the template labels.

03

From measurements to your own design

  1. Open the matching template.Inspect its details, starting dimensions and supported material options. Choose the option you intend to use.
  2. Adjust dimensions to your measurements.Use the dimension fields or dimension labels in the template details. Follow the field names and include a unit such as cm. Compare the entered values with the updated preview.
  3. Insert the design and inspect it from every side.Switch panels and infills on and off to inspect the frame itself. For a moving design, check its individual positions. Follow the editor instructions before another dimension change.
  4. Save your own assembly.After checking dimensions, save the project. Prepare the parts list and drawings from the adjusted assembly, not from the original example.

CAD operation guides →

04

What to check in the completed design

  • Check door opening and access to the more distant parts of the enclosure.
  • Inspect how the mesh, frame and animal opening meet.
  • Check access to the floor and corners for maintenance.

This guide helps plan the dimensional layout. Actual materials, hardware, attachments and load capacity depend on the finished construction; the preview alone does not establish them.

Your next step

Fit the design to your space.

Open the starting template and enter values from your own measurements. The link keeps the standard starting construction.

Open the template in CAD ↗View template details →

Related practical guides

All practical guides →