TukanCAD.com
Gardens and greenhouses · Template #513

Leave access on both sides of a butterfly-lid greenhouse.

Two lids open in opposite directions from a shared ridge. Position the structure for access to both halves and the cabinet beneath the growing bed.

Go to the steps ↓

The CAD editor and templates are free to use.

Garden greenhouse with butterfly vents and a cabinet under the planting bed
An original CAD preview of the matching template. Both positions are shown for a moving design.
#513Template
118 × 118 × 148 cmStarting design
Your dimensionsFit the design to your space.
01

What to measure before designing

Measure between finished surfaces and allow for your actual equipment. Note the openings and passages through which the assembly must fit.

01

Measure the available footprint and passages on both sides.

02

Compare growing-bed depth with comfortable working reach.

03

Check the space above the ridge and in front of the lower cabinet.

A common planning mistake

Positioning the structure against a wall may restrict one lid. The footprint of the closed frame is not enough to assess this.

02

Starting template dimensions

118 × 118 × 148 cm

These are the initial design values in the order of its dimension fields, not automatically its usable internal space. Check each axis meaning in the template labels.

03

From measurements to your own design

  1. Open the matching template.Inspect its details, starting dimensions and supported material options. Choose the option you intend to use.
  2. Adjust dimensions to your measurements.Use the dimension fields or dimension labels in the template details. Follow the field names and include a unit such as cm. Compare the entered values with the updated preview.
  3. Insert the design and inspect it from every side.Switch panels and infills on and off to inspect the frame itself. For a moving design, check its individual positions. Follow the editor instructions before another dimension change.
  4. Save your own assembly.After checking dimensions, save the project. Prepare the parts list and drawings from the adjusted assembly, not from the original example.

CAD operation guides →

04

What to check in the completed design

  • Inspect both lids in their open and closed positions.
  • Check that nearby equipment does not enter the lid paths.
  • Compare cabinet access with the arrangement of beds and paths.

This guide helps plan the dimensional layout. Actual materials, hardware, attachments and load capacity depend on the finished construction; the preview alone does not establish them.

Your next step

Fit the design to your space.

Open the starting template and enter values from your own measurements. The link keeps the standard starting construction.

Open the template in CAD ↗View template details →

Related practical guides

All practical guides →